Houston, Texas - USA - Phone (281) 391-5800 - Fax (281) 391-7595
Norfolk, UK - Phone (44) (1) 493-656145 - Fax (44) (1) 493-601772
Downhole Motors
 
SlimDril provides motors from 1-1/2" to 11-3/4" diameter. Motors commonly used for HDD applications (3-3/4", 4-3/4" and 6-3/4") are supplied with long-life bearing assemblies and can be outfitted with either fixed or field adjustable bent housings. The power sections are manufactured to the highest industry standards to provide high torque and long life. All motors are fully maintained after each use, inclusive of the Third Party NDT inspection.
 
 
Specifications
O.D. Lobe No. of OAL Gallons per Flow Rate Speed Differential Torque Recommended Bend to Bit Top Bottom
(Inches) Configuration Stages (Inches) Rotation (GPM) (RPM) (psi) (ft. lbs) Bit Size Length (in.) Conn. Conn.
3-3/4" 4/5 Lobe 3.50 222 0.62 80-160 128-256 505 768 4-1/2 - 5-7/8 54 2-7/8 Reg 2-7/8 Reg
4-3/4" 4/5 Lobe 3.5 210 0.95 100-250 105-262 505 1192 6 - 7-7/8 65 3-1/2 Reg 3-1/2 IF
4-3/4" 7/8 Lobe 2.20 210 1.78 100-250 56-140 360 1445 6 - 7-7/8 65 3-1/2 Reg 3-1/2 IF
6-3/4" 4/5 Lobe 4.80 276 2.00 300-600 150-300 690 3360 8-1/2 - 9-7/8 82 4-1/2 Reg 4-1/2 Reg
6-3/4" 7/8 Lobe 3.00 253 3.48 300-600 86-72 500 3830 8-1/2 - 9-7/8 82 4-1/2 Reg 4-1/2 Reg
7-3/4" 4/5 Lobe 3.60 262 4.00 300-900 75-225 520 5058 9-7/8 - 12-1/4 73 6-1/2 Reg 6-1/2 Reg
7-3/4" 7/8 Lobe 3.00 282 6.25 300-900 48-144 490 6894 9-7/8 - 12-1/4 73 6-1/2 Reg 6-1/2 Reg

In addition to the motors listed above, SlimDril can provide
alternative motor configuration to suit you applications


Planning, Engineering & Reporting | Directional Drilling & Guidance Services | Jetting Assemblies | Steering Tools
Drilling Motors | Hole Openers & Reamers | Drill Bits | Services & Products | Contact | Home

© 2002 SlimDril International